Home | Worldwide Shipping Info | Price Guarantee | About Troutcatchers | Contact us |

CONTACT:
01933 388281

Currency :

0

Fly Tying & Fly Fishing Equipment
All Fly Fishing Equipment, Fly Tying Gear & Accessories > Snowbee Fishing Waders > Wader Accessories
Search Your Cart

Wader Accessories

Wader Accessories

Wader accessories, make wading more enjoyable and a great deal safer. Maintain and look after your wading boots we offer replacement felt soles and wading boot studs. Also available to take care of your back on a long day's wading make sure you use the Snowbee Lumber Support Wading Belt. Finally, when wading in unfamiliar waters, use a wading staff, attached to a wading zinger.

Snowbee Heavy-Duty Wading Staff Zinger -19098
	Snowbee Heavy Duty Wading Staff Zinger can be used with small/medium landing nets, as well as lightweight Wading Staffs.
	£ 19.97 (-10.00%) £ 17.97 Details Add to Cart (6)

Snowbee Stud Socket - 19060-S
	Snowbee Stud Socket, a made to measure stud socket tool for the Screw-In Snowbee Wader / Boot Studs.
	£ 3.00 (-21.00%) £ 2.37 Details Add to Cart (1)

Snowbee Neoprene Gravel Guard - 13051
	Snowbee Neoprene Gravel Guard 3mm double lined Neoprene. Heavy-duty zip, plus Velcro flap fastening (better and more secure than hooks, plus stops fly line getting caught!!). The Snowbee gravel guard is worn over the top of wading boots (one size fits all), to prevent gravel, sand, pebbles and other debris from entering the stockingfoot wader and wading boot, a very popular product, saves wear and tear (leaks!), plus keeps you more comfortable.
	£ 27.97 (-20.02%) £ 22.37 Details Add to Cart (1)

Snowbee Telescopic Wading Staff - 19388
	Snowbee Telescopic Wading Staff a tough, practical Wading Staff made from anodised aluminium. Telescopes down from a maximum 63" to a convenient 34" for travelling. The Twist & Lock mechanism allows it to be locked at any required length. Weighted foot with Rubber Grip. Rubberised handle with adjustable lanyard & clip. The Snowbee Telescopic Wading Staff weight is 20oz / 560g
	£ 37.97 (-10.00%) £ 34.17 Details Add to Cart (8)

Snowbee Lumber Support Wading Belt - 19379
	Snowbee Lumbar Support Wading Belt, if like many anglers, you suffer from an aching back after a full days fishing, Snowbee new Lumbar Support Belt is the answer. The belt comes complete with a 2" wide webbing belt which has a quick release Plastic Clip and buckles, allowing adjustment from 34" to 51". The rear lumbar pad has 1" thick contoured neoprene, inside a Nylon cover, to provide pressure and support, just where it's needed. Snowbee Lumbar Support Wading Belt comes free with Snowbees range of 'Prestige Breathable Waders'
	£ 24.97 (-10.00%) £ 22.47 Details Add to Cart (3)

Snowbee Wading Boot Felt-Sole Kit - 19047
	Snowbee Wading Boot Felt-Sole Kit specifically designed for replacing Felt-Soles on Wading Boots. The one-piece Felt Sole is oversized to fit any size boot up to Size 14 - simply cut down to fit smaller sizes. The Snowbee Wading Boot Felt-Sole Kit includes adhesive, replacement felt-soles and full instructions. Snowbee Wading Boot Felt-Sole Kit - one size fits all
	£ 49.99 (-10.04%) £ 44.97 Details Add to Cart

Snowbee Zip Oil - Szo
	Snowbee's Zip Oil is a lubricating oil, ideal for wader and dry suit zips, jackets, foul weather gear and fishing bags. Non Toxic, stays liquid at low temperature. Press on dropper cap.
	£ 7.87 (-10.00%) £ 7.08 Details Add to Cart

Snowbee Screw-In Wader Studs - 19060
	Snowbee Screw in Wader Studs, super hard, zinc plated steel studs, give additional grip to felt, or cleated sole waders. The wader studs are suitable for most types of waders or wading boots. For easy application the studs can be inserted either with a hexagonal head socket, or a cross head screwdriver. For best results insert 6 studs around the edges of the heel area and if required a similar number around the toe area and the instep. It is not recommended to insert the studs into the main weight bearing mid sole area; this may result in the studs puncturing the inner sole. Also always check the depths of the sole in relation to stud length (Screw part of stud approx. 10mm) before you begin. If there is any doubt as to the thickness of the sole, then it is an idea to start screwing the studs in, to open up the hole, then unscrew them and snip or file off the sharp point of the stud, then re-affix. - Golden rule - if in doubt, leave them out! Snowbee Screw in Wader Studs, packs of 40
	£ 8.97 (-10.00%) £ 8.07 Details Add to Cart (7)

Snowbee Wader Fresh - 19070
	Snowbee Wader Fresh, this unique new product, exclusive to Snowbee, keeps Waders & Boots fresh & free of odours & mould.There is no getting away from it - after a hard days fishing waders & wellies are NOT the most pleasant smelling things on the planet! Snowbee wader fresh & boot spray are products developed by Snowbee Bioscience to provide the solution to an age old problem - smelly feet! These two hi-tech sprays are derived from Chitosan. A totally natural, biodegradable product, extracted from the shells of Shellfish. Chitosan has natural antimicrobial, antiseptic, deodorant and fungicidal properties.
	£ 4.97 (-10.00%) £ 4.47 Details Add to Cart

Snowbee Boot Laces
	Snowbee Boot Laces - Tough replacement laces for Snowbee's Wading Boots and being long laces, suitable for Hiking Boots too. Snowbee Boot Laces available in two different colours. 68" Long.
	£ 4.97 (-10.00%) £ 4.47 See All Options (1)

Snowbee Saltwater Neoprene Gravel Guards - 13050
	Snowbee Saltwater Neoprene Gravel Guards - Designed specifically for saltwater wading, eliminating conventional zip fastening, prone to jamming when wet wading on sand. The Velcro compatible material allows the gravel guard to wrap around your leg and secure in any position, completely preventing fine sand and gravel entering your wading boots. The Snowbee Saltwater Neoprene Gravel Guards lacing hook attaches to boots to hold them in place.
	£ 32.99 (-51.59%) £ 15.97 Details (1)

Snowbee Tungsten Screw-In Wader Studs - 19059
	Snowbee Tungsten Screw-In Wader Studs a New, super-hard, screw-in Wader Studs, with a 4-point Tungsten Carbide tip for the ultimate grip on slippery rocks and pebbles. The grade 304 stainless steel screw has high corrosion resistance, while the Tungsten Carbide head is 30% harder than the highest grade of hardened steel. Easily screwed in to boots or waders, with the Stud Tool provided. Pack of 20. For best results insert 6 studs around the edges of the heel area and if required a similar number around the toe area and the instep. It is not recommended to insert the studs into the main weight bearing mid sole area; this may result in the studs puncturing the inner sole. Also always check the depths of the sole in relation to stud length (Screw part of stud approx. 10mm) before you begin. If there is any doubt as to the thickness of the sole, then it is an idea to start screwing the studs in, to open up the hole, then unscrew them and snip or file off the sharp point of the stud, then re-affix. - Golden rule - if in doubt, leave them out!
	£ 28.97 (-10.00%) £ 26.07 Details Add to Cart (2)

Snowbee Rockhopper Wader-Grips - 19025
	Snowbee Rockhopper Wader-Grips, a genius idea, can be used on any waders or wading boots for additional grip on slippery surfaces, whether algae covered rocks, dam walls or even ice! Simply fasten the Rockhopper Wader-grips to your boots for instant, extra grip. The thermoplastic rubber material is highly elastic, so they will stretch to fit a wide range of boot sizes. Ideal for walking long distances to fish (so wants cleated soles), but also extra grip in the river or reservoir bank or rocky shoreline. Three sizes available.
	£ 10.97 (-10.00%) £ 9.87 See All Options (2)

Copyright © 2024 - Fly Tying Materials - Tools & Fly Fishing Tackle

e-Commerce Website by Oxatis