Err

Home | Worldwide Shipping Info | Price Guarantee | About Troutcatchers | Contact us |
CONTACT:
01933 388281
Currency :
Account
Snowbee Tungsten Screw-In Wader Studs - 19059

Snowbee Tungsten Screw-In Wader Studs - 19059

Snowbee
(Code: 6036)
£ 28.97
Shopping Satisfaction
(2)
2 In Stock
Snowbee Tungsten Screw-In Wader Studs a New, super-hard, screw-in Wader Studs, with a 4-point Tungsten Carbide tip for the ultimate grip on slippery rocks and pebbles. The grade 304 stainless steel screw has high corrosion resistance, while the Tungsten Carbide head is 30% harder than the highest grade of hardened steel. Easily screwed in to boots or waders, with the Stud Tool provided. Pack of 20.

For best results insert 6 studs around the edges of the heel area and if required a similar number around the toe area and the instep.
It is not recommended to insert the studs into the main weight bearing mid sole area; this may result in the studs puncturing the inner sole. Also always check the depths of the sole in relation to stud length (Screw part of stud approx. 10mm) before you begin. If there is any doubt as to the thickness of the sole, then it is an idea to start screwing the studs in, to open up the hole, then unscrew them and snip or file off the sharp point of the stud, then re-affix. - Golden rule - if in doubt, leave them out!
Customer reviews
Shopping Satisfaction
 5/5
Easy to fit. I have yet to try them in the river.
Martin E.
Shopping Satisfaction
 5/5
Nice qvality studs.
Mikael S.